Connect-tech 104 Bedienungsanleitung PDF herunterladen (Seite 20)

Connect Tech FreeForm/PCI-104 User Manual

Revision 0.00

Configuring the FPGA with the SPI Flash

In previous Xilinx FPGA configurations, the SPI flash would require programming via 3

party JTAG

test software or through in-system methods. The following features are new to ISE 9.1/9.2, and are only

available on select FPGAs, including the Virtex-5. Your FreeForm/PCI-104 card featuring the Xilinx

Virtex-5 FPGA includes a standard core to enable programming of BPI and SPI flashes over JTAG.

Configuring the FPGA / SPI flash Association

1) Select “Boundary Scan” from the “Flows” tab.

2) Right click on the FPGA and select “Add SPI Flash…”

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 26

Keine Kommentare

Connect-tech 104 Bedienungsanleitung Seite 20