Connect-tech 104 Bedienungsanleitung PDF herunterladen (Seite 10)

Connect Tech FreeForm/PCI-104 User Manual

Revision 0.00

RS-485 Headers (P5, P6)

Table 6: RS-485 Port 1 Pinout (P5)

Pin Signal Direction

1 RXD+1 Input

3 RXD-1 Input

5 TXD+1 Output

7 TXD-1 Output

9 GND power

Table 7: RS-485 Port 2 Pinout (P6)

Pin Signal Direction

1 RXD+2 Input

3 RXD-2 Input

5 TXD+2 Output

7 TXD-2 Output

9 GND power

External Power Connector (P8)

The external connector provides 5V to the power regulation circuitry. In addition, the power

connector enables the 3.3V regulator and provides VIO to the PCI Bridge.

The external power connector should only be used when the FreeForm/PCI-104 is being

programmed out side of a PCI / PCI-104 system.

Table 8: External Power Connector Pinout (P8)

Pin Signal Direction

1 5V Power

2 3.3 enable (connect to 5V) Input

3 VIO (connect to 5V) Power

4 GND Power

It is recommended that a Connect Tech Inc. FreeForm/PCI-104 power supply is used. Orientation

of the power supply connector is important. Ensure that the clip on the cable aligns with the catch

on P8, as shown below.

Figure 3: External Power Connection

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 25 26

Keine Kommentare

Connect-tech 104 Bedienungsanleitung Seite 10