Connect Tech Blue Heat/Net Sync Bedienungsanleitung PDF herunterladen (Seite 15)

Connect Tech Blue Heat/Net Sync User Manual

Revision 0.03 15

Connecting Power

The Blue Heat/Net Sync uses either a standard DC power jack or a Phoenix locking screw

terminal connector for power input. The Blue Heat/Net Sync can be safely connected or

disconnected at any time. The standard power supply requirements are as follows:

Model BMG006

5V (2.5A) power input using a DC barrel or Phoenix screw terminal connector. Rev A

models.

5V (2.5A) – 28 V DC (450mA) power input using a DC barrel or Phoenix screw terminal

connector. Rev B or greater models only.

DC Power Connector

Figure 9: DC Power Connector Illustration

NOTE: The center is positive, outside is ground (0V).

Phoenix Locking Screw Terminal Connector

Figure 10: Phoenix Locking Screw Terminal Power Connector Illustration

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 75 76

Keine Kommentare

Connect Tech Blue Heat/Net Sync Bedienungsanleitung Seite 15